Small reflow oven (N2 compatible) UNI-6116α
UNI-6116α (Nitrogen supply compatible models)
Small reflow oven (N2 compatible) UNI-6116α
Exterior dimension drawing
Basic specifications
| Number of zones | 6 heating zones / 1 cooling zone |
|---|---|
| Heating method | Upper and lower hot air + far infrared heating method |
| Maximum set temperature | Top 350℃ / Bottom 350℃ |
| Effective board width | 50～160mm |
| Transport method (selectable) | Pin chain transport/mesh transport |
| Transport speed | 0.1～0.5m/min |
| Part effective height | Top 5mm / Bottom 5mm |
| Oxygen concentration meter | Standard equipped |
| Supported languages | Japanese/English/Chinese/Korean |
| PC outlet | 1 piece (100V) |
| Board mounting allowance | 4mm |
| Pass line | 900±20mm |
| Input power supply | AC200V 3φ 13kVA 38A(Peak Power Reduction Mode) |
| Dimensions of the device *The numbers in parentheses are for mesh transport | L2,180(2,270)×D960×H1,380mm |
| Device weight | 600kg |
Options
| Expanded effective board width (up to 220mm) |
| Flux recovery device |
| Automatic width adjustment mechanism |
| Overheating prevention device |
| Board drop sensor |
| Oxygen concentration controller |
| N2 all zone supply |
| Oxygen concentration all zone sampling |
| Low oxygen concentration specifications (100ppm or less) |
| Cooling reinforcement unit/cooling chiller |
| UPS (uninterruptible power supply) |
| Power transformer |
| Entrance/exit conveyor extension |
| Circulation fan stop detection |
| Hood interlock |
| Emergency stop button position change |
| Reflow checker (profile measurement unit) |
| Various types of cooling conveyors and transport conveyors |
| Paint color change |